From Deseret News archives:

Bits of color: Quilting expert offers advice fabric

Published: Tuesday, Oct. 7, 2008 12:04 a.m. MDT
 |  E-MAIL | PRINT | FONT + - 
A variation on that is the split complementary pattern. This uses one color and the two colors adjacent to its opposite on the color wheel: red, yellow-green and blue-green, for example. Or orange and blue-green and blue-violet.

Colors that are analogous — next to each other on the wheel — also work well together: Try yellow, yellow-green, green and blue-green, for example.

And a final pattern is triadic: three colors that form an equilateral triangle on the color wheel: red, blue and yellow; or, orange, green and violet.

2. Consider tints, shades and values. Tints are created by adding white to a basic color; shades are created by adding black. Value refers to the degree of lightness and darkness of a color. Usually, the prettiest quilts have a mixture of light, medium and dark values, she says. "The variety of values creates contrast."

But the thing to remember, she said, is that "values are relative." What could be considered a dark value when paired with lighter fabrics can also be considered light when paired with darker fabrics.

When it comes to values, you also need to consider the position in the quilt. "Bright colors will jump out more. High-contrast fabrics will give you a more graphic design. Low-contrast colors will have a softer look."

Story continues below
And remember that warm colors — those on the left side of the wheel (reds and oranges) — advance, while cool colors — those on the right (blues and greens) will recede.

A good place to begin, she said, is to have about 15 percent of the quilt as light fabrics; 70 percent medium; 15 percent dark. "As you get more experienced, you can adjust those percentages to suit your design."

3. Look at fabric quality. Another important consideration in fabric selection is the quality of the material. "Your quilt will only be as good as the worst piece of fabric. Don't spend all that time making a quilt with poor fabrics."

Generally, the more fabric costs the better it is, but that is not always the case, she said. Nor is the manufacturer. "I've had materials from the same line that varied greatly in quality."

Poor fabric is thin, see-through and ravels easily.

Fabric content is another factor. Most quilt fabrics are 100 percent cotton. "But some that are less than 100 percent are starting to show up, even at quilt stores, so check the labels," she said.

Unless you really know what you are doing, use similar fabrics. "I've seen quilts made with denim and satin or polyester and cotton. But they are very hard to make look good."

Recent comments

Great info. One of these days you'll teach me how to do all this!!

Yvonne | July 6, 2009 at 4:48 p.m.

Great article. Thanks. I am also a quilter and a former Sanpeter.

Dawna | Oct. 8, 2008 at 12:19 a.m.

"Advice fabric"?

Hire some proofreaders or editors who can...

Davis | Oct. 7, 2008 at 3:37 p.m.

Image

Brenda Bailey, quilt designer and owner of Pie Plate Patterns in Fountain Green, teaches a class on fabric selection at the Utah Quilt Guild's Annual Quilt Festival in Ogden Sept. 24.

previousnext

Latest comments

Well said.

Is this journalism? or simply a rant by a secret Ute fan? To be honest this...

This article is awesome and truly reflects what was going through Max Hall's...

Utahs only D1 classy team USU.

Residents startle Provo burglars

I am a BYU student who lives at Raintree. I always lock the door when I...

By the way, where did you get your Psychology degree?

Aggies hold on, win wild one

you're still USU. You have another tough schedule next year and will be lucky...

Well spoken madam

good article

Hall mouths off about hate of Utah

As a long time BYU fan, Hall should apologize. He did no favors to BYU saying...

Advertisements